Product News
Why do we need to add antiscalant to reverse osmosis equipment?
Reverse osmosis (RO) technology is a "purification weapon" in the field of Water Treatment, but do you know? If the core component of RO membrane wants to operate stably for a long time, it cannot do without an "invisible guardian" - antiscalant. Why must it be added? How does it protect the membrane? Today, we will unveil the mystery of antiscalant!
Pleated filter product features
As an important industrial Filtration Equipment, the pleated filter element has been widely used in many fields due to its excellent chemical compatibility, corrosion resistance, large filtration area, strong dirt holding capacity, and long service life.
Inventory of pollution suffered by ion exchange resin operation
Ion exchange resin is widely used in water treatment systems, but its performance is easily affected by a variety of pollutants, resulting in reduced exchange capacity and deterioration of effluent water quality.
When starting a centrifugal pump, should the pump or the valve be opened first?
The starting sequence and valve status of the water pump directly affect its safety and efficiency, and different pump types have different starting methods.
Water Treatment Process: Multi-media Filtration
Multi-media filtration is a key link in water treatment, and its core equipment is a multi-media filter. The process mainly includes two stages: filtration and backwashing, which will be explained separately below.
What Are the Reasons for the Decrease in Electrical Resistivity of EDI Equipment?
During the operation of EDI ultra-pure water equipment, if there is a decrease in water production resistivity, it is usually closely related to influent water quality, operation parameter control, pollutant accumulation, and other factors.
Back Pressure Fault and Detection of Water Production in Reverse Osmosis Operation
The PA layer forms a densely cross-linked network structure through the interfacial polymerization process, which is the core layer to realize the desalting function. Under normal working conditions, the inlet pressure should be maintained at 1.0-1.5MPa (depending on the water quality), and the water flow should permeate from the film surface to the production pipe.